A Note about Licensing and Compliance
Becoming an HDCP Licensee does not mean that our products are automatically authorized by DCP LLC.
The HDCP License Agreement only provides a license to manufacture and sell products that comply with the terms of the Agreement, including the Compliance and Robustness Rules. Products that fail to comply with these provisions are non-compliant and their manufacture and sale is not authorized by DCP LLC.
Further, compliance testing does not guarantee that a product is fully compliant with the HDCP License Agreement.
Even if a product passes compliance testing, the product may still not be fully compliant with the HDCP License Agreement, as compliance testing does not determine whether a given product meets any Compliance & Robustness Rules for the product.
As the licensor of HDCP, DCP takes enforcement efforts seriously. DCP constantly monitors the market for unauthorized devices and devices that illegally circumvent HDCP, and when those devices are found, acts expeditiously to remove them from the marketplace. To date, over 4,000 discrete listings for devices have been removed from numerous websites. Additionally, lawsuits have been filed against parties who have persisted in selling unauthorized devices and/or illegal circumvention devices.
HDCP Testing now available
Why should you test?
The Compliance test is intended as an aid to the correct implementation of the Compliance Rules for hardware and software implementations of the HDCP Specification in a Licensed Product. The DCP LLC strongly recommends that you complete this testing for each hardware model or software version of a Licensed Product before releasing any product and at a sufficiently early date in design, as well as during production, to avoid product compliance redesign delays. The testing does not address all requirements necessary to create a product that is Compliant. Failure to perform the tests and analysis necessary to comply fully with the HDCP Specification, Compliance Rules or Robustness Rules could result in a breach of the HDCP License Agreement and appropriate legal action of Licensor and Eligible Content Participants.
DCP Approved HDCP Compliance Test Equipment
Any Test Equipment appoved by DCP can be used by Authorized Test Centers for Compliance Testing.
Miracast Test Equipment:
SL-8810 HDCP Protocol Analyzer
Approved for testing HDCP 2.2 on the Miracast interface.
Current DCP Approved Firmware Version for CTS 1.0 Testing: 2.2
Contact for information: Vprime, LLC
HDMI Test Equipment:
SL-8800/SL-8800PLUS HDCP Protocol Analyzer
Approved for testing HDCP 2.2 & HDCP 2.3 on the HDMI interface.
Current DCP Approved Firmware Version for CTS 1.0 & Errata Testing: 2.13
Approved for testing HDCP 1.4 on the HDMI Interface.
Current DCP Approved Firmware Version for CTS 1.2 Testing: 2.13
Contact for information: Vprime, LLC
Teledyne LeCroy - quantumdata 980 Advanced Test Platform
Approved for testing HDCP 2.2 & HDCP 2.3 on the HDMI interface.
Current DCP Approved Firmware Version for CTS 1.0 Testing: 4.17.49 Gateware: 4.14.1
Contact for information: Teledyne LeCroy
Teledyne LeCroy - quantumdata M41h 48G Video Analyzer/Generator for HDMI 2.1 testing
Approved for testing HDCP 2.2 & HDCP 2.3 on the HDMI interface.
Current DCP Approved Firmware Version for CTS 1.0 Testing: ATP-64 Release 6.50 or later
Contact for information: Teledyne LeCroy
Astro Design VA-1842 Protocol Analyzer
Approved for testing HDCP 2.2 & HDCP 2.3 on the HDMI interface.
Current DCP Approved Firmware Version for CTS 1.0 Testing: 1.14
Contact for information: Astro Design
UITA-2000 HDCP Protocol Analyzer
Approved for testing HDCP 1.4 on the HDMI interface.
Current DCP Approved Firmware Version for CTS 1.2 Testing: 2.0.1.02
Contact for information: VTM Test Tools
Teledyne LeCroy - quantumdata 882EA Video Test Generator
Approved for testing HDCP 1.4 on the HDMI interface.
Current DCP Approved Firmware Version for CTS 1.2 Testing: 2.26.0, EST ver 12
Contact for information: Teledyne LeCroy
DisplayPort Test Equipment:
Teledyne LeCroy - quantumdata 980 Advanced Test Platform
Approved for testing HDCP 2.2 & HDCP 2.3 Receivers, Transmitters, and Repeaters.
Current DCP Approved Firmware Version for CTS 1.1 Testing: 4.22.22
Contact for information: Teledyne LeCroy
Teledyne LeCroy - quantumdata M42d 80G Video Analyzer/Generator for DisplayPort Testing
Approved for testing HDCP 2.2 & HDCP 2.3 on the DisplayPort interface.
Current DCP Approved Firmware Version for CTS 1.0 Testing: ATP-64 Release 6.50 or later
Contact for information: Teledyne LeCroy
Teledyne LeCroy - quantumdata M41d HBR3 Video Analyzer/Generator for DisplayPort Testing
Approved for testing HDCP 2.2 & HDCP 2.3 on the DisplayPort interface.
Current DCP Approved Firmware Version for CTS 1.0 Testing: ATP-64 Release 6.50 or later
Contact for information: Teledyne LeCroy
Unigraf UCD-323 DisplayPort Reference Source and Sink
Approved for testing HDCP 2.2 & HDCP 2.3 Receivers and Transmitters on the DisplayPort interface.
Current DCP Approved Firmware Version: 1.6.12
Contact for information: Unigraf Oy
Unigraf UCD-400 DisplayPort Reference Source and Sink
Approved for testing HDCP 2.2 & HDCP 2.3 Receivers,Transmitters, and Repeaters.
Current DCP Approved Firmware Version: 1.6.12
Contact for information: Unigraf Oy
Unigraf UCD-301 DisplayPort Reference Sink
Approved for testing HDCP 2.2 & HDCP 2.3 Transmitters on the DisplayPort interface.
Current DCP Approved Firmware Version: 1.6.12
Contact for information: Unigraf Oy
Unigraf VTG-5225 / DPT-200 DisplayPort Reference Source
Approved for testing HDCP 1.3 Receivers on the DisplayPort interface.
Current DCP Approved Firmware Version: 3.3.9
Contact for information: Unigraf Oy
Unigraf UFG-04 DP-512 / DPR-100 DisplayPort Reference Sink
Approved for testing HDCP 1.3 Transmitters on the DisplayPort interface.
Current DCP Approved Firmware Version: 3.4.1
Contact for information: Unigraf Oy
Type-C DP Alt mode Test Equipment:
Unigraf UCD-340 DisplayPort Reference Source and Sink
Approved for testing HDCP 2.2 & HDCP 2.3 Sinks and Sources on the DisplayPort interface.
Current DCP Approved Firmware Version: 1.6.12
Contact for information: Unigraf Oy
MHL Test Equipment:
Simplay Labs SL-8800 w/ M3X MHL Adaptor
Approved for testing HDCP 2.2 on the MHL interface.
Current DCP Approved Firmware Version for CTS 1.0 Testing: 2.10
Contact for information: Vprime, LLC
Teledyne Lecroy - quantumdata QD-882EA Video Test Generator w/ TPA-MHL-8R
Approved for testing HDCP 1.x on the MHL interface.
Current DCP Approved Firmware Version for CTS 1.2 Testing: 2.26.0, EST ver 12
Contact for information: Teledyne LeCroy
HDCP Authorized Test Centers
To arrange testing for your device, please select your interface:
Disclaimer:
INFORMATION PROVIDED BY DIGITAL CONTENT PROTECTION, LLC IS PROVIDED "AS IS" WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. DIGITAL CONTENT PROTECTION, LLC DISCLAIMS ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OF INFORMATION ON THIS WEB SITE. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED HEREIN. Compliance Testing is intended as an aid to the correct implementation of the Compliance Rules for hardware and software implementations of the HDCP Specification in a Licensed Product. The testing does not address all requirements necessary to create a product that is Compliant. Successful completion of all tests for a given type of device does not earn or imply, directly or indirectly, any certification, endorsement or other statement of fitness for use by the DCP, LLC. Test results and reports are for the information of the licensee and intended solely as an aid to help determine if their implementation meets the requirements of the Compliance rules in the license agreement.